WISECO
WISECO | Ref: W40007M07700

Wiseco Pro Lite Schmiede Kolben Kit Suzuki RMZ 250 10-..


_Wiseco Pro Lite Schmiede Kolben Kit Suzuki RMZ 250 10-.. | W40007M07700 | Greenland MX_

Foto nur zu Informationszwecken, das nicht mit dem richtigen Produkt übereinstimmen muss.

Details

https://www.greenlandmx.de/de/wiseco-pro-lite-schmiede-kolben-kit-suzuki-rmz-250-10-../W40007M07700.html
WISECO
WISECO | Ref: W40007M07700

Wiseco Pro Lite Schmiede Kolben Kit Suzuki RMZ 250 10-..


Personalisierter
Kundenservice
Weniger Bezahlen
Besser Kaufen
Club GMX
Exklusive Vorteile
🔸PROMO PACK

PISTÓN + JUNTA PARTE ALTA

Por la compra de 1 pistón y 1 junta parte alta obtendrás un -10% de dto en ambas piezas

No acumulable con otras ofertas o códigos promocionales, ni outlet. Motos, Bicis y OEM quedan excluidos de la oferta.

Sin códigos, descuento aplicado directamente al añadir los productos al carrito.

⏰EXTRA 15%
(*) Rabatt gültig bis 30/03/2024 um 23h59 CEST. Nicht kombinierbar mit anderen Angeboten oder Aktionscodes. Motorräder, Fahrräder, Original-Ersatzteile sind von dem Angebot ausgeschlossen. Maximaler Rabatt von 15%, einige Marken können einen niedrigeren Rabatt haben, und andere können von der Aktion ausgeschlossen werden. Der Rabatt wird nach Eingabe des Codes in den Warenkorb verrechnet.
UVP 240,45€ | Ersparnis 35,46€
GMX-Preis -15%
204 , 99
Mwst. inklusive
Versand gratis
Haben Sie es billiger gesehen?
- +

-10% EXTRA | Pistón+Junta Alta

COD: EASTER15
Bis zu -15% EXTRA

Neumáticos

Beschreibung
Tech. Details
Bewertungen
Größentabelle

Wiseco Schmiedekolben Pro Lite

Geschmiedeter Kolben der amerikanischen Firma Wiseco.

  • Das Schmieden während des Fertigungsprozesses macht die Kolben viel widerstandsfähiger und langlebiger als die standardmäßigen Kolben aus Guss.
  • Daher eignen Sie sich für den Einsatz im Wettkampf, bei dem vom Kolben Bestleistung und maximale Widerstandsfestigkeit abverlangt wird.
  • Der Kolben beinhaltet das Teileset, Kolben und Verschlussklammern.
Marken Wiseco
Modalität Cross/Enduro
-

HOW TO MEASSURE ANY DIRT BIKE´S PISTONS

The pistons of any internal combustion engine, two or four-stroke, are conical and oval, to control its expansion in its operation. To get to know your maximum measurement you have to measure at 10-12 mm. of the skirt, in the opposite part to the bolt.

When we see a mark on the head of the piston, for example, 80 mm. or we have a cylinder of 80 mm. this measure is corresponds to the cylinder, when meassuing the piston we will see that actually measurement is 79.95 mm., the tolerance between piston and cylinder would be 5 cents (0.05 mm.).

In the aluminum cylinders with hard chrome interior treatment, already in disuse, or NIKASIL the measure of 80 mm. It is usually fixed to 80 mm.

The pistons work with tolerances between 4 to 6 hundredths (0.04-0.06) for two-stroke engines and 3 to 4 hundredths for four-stroke engines (0.03-0.04). To fix a deformed cylinder, the interior of the cylinder shall be polished first and the measurement is adjusted with pistons that are over-measured for this purpose, marked with letters A-B-C-D (selection); the lowest measure being A, increasing 1 hundredth per letter; that is, selection B 0.01 mm. greater than A, C 0.02 mm. greater than A, etc.

EXAMPLES

New Cylinder Ø 80.00 mm. mounts a piston of Ø 79,97 A Factory Tolerance 0.03 mm.

Polished Cylinder Ø 80,01 mm. mounts a piston Ø 79,98 B Factory Tolerance 0,03 mm.

Polished Cylinder Ø 80,02 mm. mounts a piston Ø 79,99 C Factory Tolerance 0,03 mm.

Polished Cylinder Ø 80,03 mm. mounts a piston Ø 80,00 D Factory Tolerance 0,03 mm.

The important thing is to maintain the tolerance, which the manufacturer recommends, between cylinder and piston.

Sie können auch mögen

Über die Marke

Produkte, die Sie angeschaut haben

  • 240,45€ 204,99€
    🔸PROMO PACK ⏰EXTRA 15%
    -15%

    -10% EXTRA | Pistón+Junta Alta COD: EASTER15
    Bis zu -15% EXTRA